1.vinyl record player3 speeds USB turntable player
2.vinyl to PC ready to transit to MP3
3.retro usb turntable player
vinyl record player
1.Place the record of your choice on the turntable. If required, do not forget to place the adaptor on the record spindle.
2.Choose the desired playing speed using the speed selection switch betwee n 33.3, 45 and 78r pm.
3.Turn on the Rotary Power Switch, note that this also controls volume.
4.Release the tone arm lock.
5.Raise the arm with your hand lightly.
6. Place the stylus vertically over the first track of the record, the turntable will start
7.Put down the stylus slowly on to the record to play.
8.When a record comes to the end, the turntable will stop automatically if the
auto-stop switch is in the ON position. If the switch is in the off position then it
will keep revolving until the tone arm is returned to the tone arm rest.
9.Lift up the tone arm and put it on the rest whe n finished.
10.Replace the protective cap on the stylus and close the tone arm lock.
Turn off power at mains.
3 speeds USB turntable record playerAdaptor for 45 rpm records includedAuto & Manual stop selected
Switchable 3 speed
Belt drive system
Ceramic cartridge with protectal cap included
Plastic dust cover
3 speed (33 1/3, 45 and 78 rpm) turntables
Compatible to 18cm, 25cm and 30cm record
Ensure that the mains voltage of your home corresponds to the operating voltage of
the unit. Your unit is ready to be connected to a mains voltage of 230V/50Hz.
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built in speakers you may wish
to connect it to your existing Hi Fi system. Connect the audio plugs to the AUX input
on your mixer or amplifier using an RCA cable (not supplied)
Red plug into R/H channel input.
White plug into L/H channel input.